top of page

Honda Varadero XL1000V Fuel Level Sensor Kit

Product Details
Production of more pieces usually takes: 4 weeks


  • Plug and play fuel gauge based on hydrostatic pressure principle.
  • Waterproof USB quick charge 3.0 charging port for charging GPS or smartphone.
  • Plug and play harness, holders, screws etc... just everything needed for fast installation on Honda Varadero XL1000V (2003-2006).
    • note: Using on other years is possible, but the steel plate holder will not fit.
  • Space for next instrument (gear indicator etc..)


The fuel gauge Sensor is connected to the fuel hose under the fuel tank. The fuel causes hydrostatic pressure measured by the Sensor. The data from this pressure sensor are evaluated by a microcomputer, which compares it to the data in its memory (the memory is set up during calibration) and then shows the current amount of fuel on the display. Therefore, you don't need any float or other modification to the fuel tank. The microcomputer makes many other minor operations to ensure that even in hard terrain with fast level changes, the amount of fuel showed on the display is "clean" and stable.

Please note that the displayed value is indicative. It can fluctuate a slightly with the acceleration/deceleration of the motorcycle and when leaning into corners. It can also drop slightly on some bikes when riding at full throttle or at high revs with high fuel flow from the tank to the engine. But you still have information about how much fuel you have in the tank.


  • Miniature display panel: 31 x 21 x 17 mm (1.2 x 0.8 x 0.7 in).
  • Great stability in every situation includes hard off-road use.
  • Built-in fuse
  • Function for compensation of the Fuel tank shape - shows real amount of the fuel in the tank.
  • Automatic display brightness control.
  • Low fuel flashing function (can be turned off).




Save this product for later
bottom of page