Measure fuel level without need of the float in fuel tank.
In stock
1
Product Details
Universally usable fuel gauge that allows to measure the fuel level without need of the float in fuel tank! Device measures hydrostatic pressure of the fuel, computes the fuel level and sends the corresponding signal to your OEM or aftermarket gauge. This device generates the same resistance changes as the floats for which conventional fuel meters are intended.
FuelGaugePro - Universal Sending Unit can generate resistance 0 to 510 (or 510 to 0) Ohms and 33 to 240 (or 240 to 33) Ohms.
Range of connected gauge must be exactly 0 to 510 or 33 to 240 (or vice versa) Ohms.
BENEFITS
Measures fuel level on the bikes without OEM fuel gauge.
Operates with most aftermarket dashboards and fuel gauges designed for operation with float.
You don't need any modification of fuel tank.
HOW IT WORKS
The fuel gauge sensor is connected to the fuel hose under the fuel tank. The fuel causes hydrostatic pressure measured by the sensor. The data from this pressure sensor are evaluated by a microcomputer, which compares it to the data in its memory (the memory is set up during calibration) and then simulates actual position of the float. After that, the connected gauge displays actual fuel level.
Please note that the displayed value is indicative. It can fluctuate a slightly with the acceleration/deceleration of the motorcycle and when leaning into corners. It can also drop slightly on some bikes when riding at full throttle or at high revs with high fuel flow from the tank to the engine. But you still have information about how much fuel you have in the tank.
USAGE AND COMPATIBILITY
Motorcycles, cars, diesel-powered vehicles, small hobby aircrafts, hang-gliders etc...
Most of gasoline and diesel fuel systems without fuel pump
Most of gasoline and diesel fuel systems with fuel pump outside fuel tank (except closed fuel systems)
